Tag Archives: industrial sprocket

China Standard High Quality Industrial Carbon Stainless Steel Roller Chain Sprocket and Set OEM

Product Description

1) A series chains:
A) Simplex: 25-1 ~ 240-1
B) Duplex: 25-2 ~ 240-2
C) Triplex: 35-3 ~ 240-3
D) Quadruplex: 40-4 ~ 240-4
E) Quintuple: 40-5 ~ 240-5
F) Sextuple: 40-6 ~ 240-6
G) Octuple: 40-8 ~ 240-8
2) B series chains:
A) Simplex: 04B-1 ~ 48B-1
B) Duplex: 04B-2 ~ 48B-2
C) Triplex: 06B-3 ~ 48B-3
D) Quadruplex: 08B-4 ~ 48B-4
E) Quintuple: 08B-5 ~ 48B-5
F) Sextuple: 08B-6 ~ 48B-6
G) Octuple: 08B-8 ~ 48B-8
3) Colors available: Natural, yellow, blue, black
4) Materials: Alloy, Carbon steel, stainless steel
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Transmission Chain
Material: Alloy
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*11/128"
Structure: Roller Chain
Customization:
Available

|

Customized Request

wheel sprocket

Best Lubrication Practices for wheel sprocket Systems

Proper lubrication is essential for maintaining the efficiency and longevity of wheel sprocket systems. The lubrication practices can vary depending on the specific application and the environment in which the system operates. Here are some best practices for lubricating wheel sprocket systems:

  • Cleanliness: Before applying any lubricant, ensure that the wheel sprocket surfaces are clean and free from dirt, debris, and old lubricant residue. Cleaning the components helps prevent contaminants from mixing with the lubricant and causing additional wear.
  • Choose the Right Lubricant: Select a lubricant specifically designed for the wheel sprocket system. Consider factors such as load, speed, temperature, and environmental conditions when choosing the appropriate lubricant. Some systems may require grease, while others may need oil-based lubricants.
  • Apply Adequate Amount: Apply the lubricant in the right quantity to ensure proper coverage of the contacting surfaces. Too little lubricant may not provide sufficient protection, while too much can lead to excess heat and waste.
  • Regular Lubrication Schedule: Establish a maintenance schedule for lubrication based on the operating conditions of the system. In high-demand applications, more frequent lubrication may be necessary to prevent premature wear.
  • Monitor and Reapply: Regularly monitor the condition of the wheel sprocket system and observe any signs of inadequate lubrication, such as increased friction or unusual noise. Reapply lubricant as needed to maintain optimal performance.
  • Re-lubrication After Cleaning: If the wheel sprocket system is cleaned, ensure that fresh lubricant is applied after cleaning to restore the protective layer.
  • Consider Lubrication Type: Depending on the application, consider using dry lubricants or solid lubricants for environments where dust and dirt accumulation may be a concern.

It’s essential to follow the manufacturer’s recommendations and guidelines for lubrication. Additionally, consult with lubrication experts or equipment suppliers for specific recommendations based on your wheel sprocket system’s unique requirements.

wheel sprocket

Using a Belt Sprocket in Place of a Chain Sprocket with a Wheel

Yes, in many cases, a belt sprocket can be used in place of a chain sprocket with a wheel, provided that the system is designed to accommodate the change.

Both chain sprockets and belt sprockets serve the same fundamental purpose of transferring rotational motion and power between the wheel and the driven component. However, there are some important considerations to keep in mind when replacing a chain sprocket with a belt sprocket:

  • Alignment: Belt sprockets and chain sprockets must be aligned properly with the wheel to ensure smooth and efficient power transmission. Any misalignment can cause premature wear and reduce the system’s overall performance.
  • Tension: Chain-driven systems require specific tension to prevent slack and maintain proper engagement between the sprockets and the chain. Belt-driven systems, on the other hand, require appropriate tension to prevent slippage. Ensuring the correct tension for the specific type of sprocket is crucial for reliable operation.
  • Load Capacity: Consider the load capacity and torque requirements of the system when selecting a belt sprocket. Belt sprockets may have different load-carrying capabilities compared to chain sprockets, and using the wrong type can lead to premature wear or failure.
  • Speed and RPM: Belt-driven systems may have different operating speeds and RPM limits compared to chain-driven systems. Ensure that the selected belt sprocket can handle the desired rotational speed without exceeding its design limitations.
  • System Design: Changing from a chain-driven system to a belt-driven system (or vice versa) may require modifications to the overall system design, including the size of the sprockets and the layout of the system. Consult with an engineer or a qualified professional to ensure that the replacement is appropriate and safe.

Overall, replacing a chain sprocket with a belt sprocket can be a viable option in certain applications. However, it’s essential to consider the factors mentioned above and evaluate the compatibility of the new sprocket with the existing system to achieve optimal performance and longevity.

wheel sprocket

Choosing the Right Size of Sprocket to Match a Wheel

Choosing the correct size of sprocket to match a wheel is essential for ensuring efficient power transmission and proper functionality of a mechanical system. Here are the steps to help you choose the right size of sprocket:

1. Determine the Pitch Diameter of the Wheel:

Measure the diameter of the wheel from the center to the point where the teeth of the sprocket will engage with the wheel. This measurement is known as the pitch diameter of the wheel.

2. Identify the Desired Gear Ratio:

Determine the gear ratio you want to achieve for your application. The gear ratio is the ratio of the number of teeth on the sprocket to the number of teeth on the wheel and determines the speed and torque output.

3. Calculate the Number of Teeth on the Sprocket:

Once you have the pitch diameter of the wheel and the desired gear ratio, you can calculate the number of teeth on the sprocket using the formula:

Number of Teeth on Sprocket = (Desired Gear Ratio) * (Number of Teeth on Wheel)

4. Select a Standard Sprocket Size:

Based on the calculated number of teeth on the sprocket, choose a standard sprocket size that comes closest to the calculated value. Sprockets are available in various tooth counts, and you may need to choose the nearest size available.

5. Consider Chain Compatibility:

If you are using a chain drive system, ensure that the selected sprocket is compatible with the chain you plan to use. The chain pitch (distance between the centers of adjacent roller pins) should match the pitch of the sprocket.

6. Verify Center Distance:

Check that the center distance between the wheel and the sprocket is appropriate for your application. The center distance is the distance between the centers of the wheel and the sprocket and should be set to achieve the desired tension and alignment of the chain or belt.

7. Consider the Material and Tooth Profile:

Select a sprocket material suitable for your application, such as steel, stainless steel, or plastic, based on factors like load, environment, and operating conditions. Additionally, consider the tooth profile (standard or custom) to ensure smooth engagement with the chain or belt.

By following these steps and considering the specific requirements of your machinery and mechanical system, you can choose the right size of sprocket to match your wheel and achieve optimal performance and longevity of the system.

China Standard High Quality Industrial Carbon Stainless Steel Roller Chain Sprocket and Set OEM  China Standard High Quality Industrial Carbon Stainless Steel Roller Chain Sprocket and Set OEM
editor by Dream 2024-05-06

China Best Sales Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket

Product Description

Product Parameters

Company Profile

-HangZhou Choho Industrial Co., Ltd. is a leading company in the domestic chain transmission industry. the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise, and the first A-share listed company in China’s chain drive industry. The stock code is 003033.
-Relying on industry-leading R&D technology, product quality and service, CHOHO has achieved plenty of high-quality customers. We supply vehicle chain system products for CZPT vehicle manufacturers such as Honda, Yamaha, Suzuki, DaHangZhouang, CF MOTOR, HangZhou Motorcycles, Knorr-Bremse etc.; Supply agricultural chain system products for CZPT agricultural machinery manufacturers at home and abroad, such as German CLASS and LOVOL; Supply industrial equipment chain system products for CZPT enterprises such as ZheJiang HangZhouan, HangZhou Logistics, HangZhou Kejie and Sinsong Robotics. The trademark has been registered in many countries, and the products are exported to a great number of countries and regions in Europe, America, Southeast Asia, South America, Africa etc., serving more than 3,000 after-sales customers.

Production Capacity Equipment

-By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.

Our Advantages

1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.

Product Advantages

HangZhou CHOHO possesses advanced manufacture equipments such as high precision machining center, hold-in program control broacher, Japan CNC lathe, South Korea CNC lathe, ZheJiang CNC hobbing machine, ZheJiang CNC gear shaping machine, unique spray cooling technology double station high frequency quenching furnace,honing machine tool, laser marking machine to develop large scale, high quality , professional and stable process. inspection instruments such as metallographic test machine, chemical analysis machine, fatigue test machine, projection and wearing test machine to make sure each sprocket we sold have reliable quality.
 

Certifications

-CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.

Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!

Broad Customer Channels  Market Continues to Develop!

International Exhibition

CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!

 

Packaging & Shipping

Packaging Details: Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization

 

We are very close to the port of HangZhou, which saves a lot of logistics costs and transportation time!
 

We have our own logistics company and transportation department. If you need me to deliver goods to your warehouse or other ports in China, such as ZheJiang Port and ZheJiang Port, we can also do it!

Related Products:

 

FAQ:
1. Are you a Manufacturer or Trade Company?
    -We are a factory focused on producing and exporting Chains for over 36 years and have a professional international trade team.
2. What terms of payment do you usually use?
    -T/T term 30% in advance,70% balance before shipment. Show your products and packaging before shipping.
3. What is your lead time for your goods?
    -Normally 1~45 days depending on order quantity & Spec, Stock can be shipped immediately.
4. Do you attend any Shows?
    -We attend the Hannover Messe, Bologna Fair, Canton Fair, AMTS, VIV ASIA, CIAME, Motor China, PTC Asia, Frankfurt Auto Parts, and other world-famous exhibitions!
5. Do you offer free samples?
   -Yes, we can. or you just bear the shipping cost.
6. Is OEM available?
   -Yes, OEM is available. 
7. What are your major products?
   -Our main products are all kinds of Automobile Chain Systems, Motorcycle Chain Systems, Industrial Chain Systems, Agricultural Chain Systems, Bicycle chain Systems, Saw Chains, and Vessel Chain.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CCC, ISO9001, CE, E-Mark, RoHS, TS16949, TUV/SGS/BV/CE
Standard Component: Non-Standard Component
Technics: Nc Maching
Samples:
US$ 4.99/Piece
1 Piece(Min.Order)

|

Order Sample

Sprocket Samples
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Factors Affecting the Efficiency of a wheel sprocket Setup

Several factors can influence the efficiency of a wheel sprocket system in power transmission and motion control applications. These factors should be carefully considered and optimized to ensure the system’s overall effectiveness and performance:

  • 1. Friction: Friction between the wheel, sprocket, and the chain or belt can lead to energy losses. Using high-quality materials and lubrication can help reduce friction and improve efficiency.
  • 2. Alignment: Proper alignment between the wheel and the sprocket is critical. Misalignment can cause increased wear, noise, and reduced efficiency. Regular maintenance and alignment checks are essential.
  • 3. Tension: The correct tension in the chain or belt is crucial for efficient power transmission. Too loose or too tight tension can lead to performance issues and premature wear.
  • 4. Material and Design: The choice of materials for the wheel sprocket, as well as their design, can impact efficiency. High-quality materials and well-engineered components reduce wear and improve overall system performance.
  • 5. Load Distribution: Uneven load distribution across the wheel sprocket can lead to localized wear and decreased efficiency. Ensuring proper load distribution helps maintain uniform wear and power transmission.
  • 6. Environmental Factors: Harsh environmental conditions, such as dust, moisture, and extreme temperatures, can affect the efficiency of the system. Choosing suitable materials and implementing protective measures can mitigate these effects.
  • 7. Maintenance: Regular maintenance, including lubrication, inspection, and timely replacement of worn components, is vital for the long-term efficiency of the system.
  • 8. Speed and Torque: The operating speed and torque requirements of the application should be considered when selecting the appropriate wheel sprocket size and specifications.
  • 9. Chain or Belt Type: Different types of chains or belts, such as roller chains, silent chains, or toothed belts, have varying efficiencies. Choosing the right type for the specific application is crucial.
  • 10. System Integration: The wheel sprocket system should be integrated correctly with other components in the machinery to ensure smooth operation and minimal energy losses.

By carefully considering and optimizing these factors, it is possible to improve the efficiency of the wheel sprocket system, leading to reduced energy consumption, less wear and tear, and overall better performance.

wheel sprocket

Noise and Vibration in wheel sprocket Configurations

In a wheel sprocket configuration, noise and vibration levels can vary depending on several factors:

  1. Quality of Components: The quality of the wheel sprocket components can significantly impact noise and vibration. Well-manufactured and precisely engineered components tend to produce less noise and vibration.
  2. Lubrication: Proper lubrication of the sprocket teeth and chain or belt can reduce friction, which in turn helps minimize noise and vibration.
  3. Alignment: Correct alignment between the wheel sprocket is crucial. Misalignment can lead to increased noise and vibration as the components may not mesh smoothly.
  4. Tension: Maintaining the appropriate tension in the chain or belt is essential. Insufficient tension can cause the chain to slap against the sprocket teeth, resulting in noise and vibration.
  5. Speed and Load: Higher speeds and heavier loads can lead to increased noise and vibration levels in the system.
  6. Wear and Damage: Worn-out or damaged components can create irregularities in motion, leading to increased noise and vibration.

To reduce noise and vibration in a wheel sprocket setup:

  • Use high-quality components from reputable suppliers.
  • Ensure proper lubrication with appropriate lubricants.
  • Regularly inspect and maintain the system to detect any misalignment, wear, or damage.
  • Follow manufacturer guidelines for chain or belt tensioning.
  • Consider using vibration-damping materials or mounting methods if necessary.

Minimizing noise and vibration not only improves the comfort and safety of the machinery but also extends the life of the components by reducing wear and fatigue.

wheel sprocket

Can a wheel sprocket System be Used in Bicycles and Other Vehicles?

Yes, a wheel sprocket system is commonly used in bicycles and various other vehicles. In bicycles, the wheel sprocket system is a fundamental part of the drivetrain, which transfers power from the rider’s legs to the wheels, propelling the bicycle forward.

The typical bicycle drivetrain consists of a chain, front sprockets (chainrings), rear sprockets (cassette), and the bicycle’s wheels. When the rider pedals the bicycle, the chain engages with the sprockets, and as a result, the rotational motion from the pedaling is transferred to the rear wheel.

The selection of sprocket sizes (number of teeth on chainrings and cassette) can affect the gear ratio, allowing cyclists to adjust their pedaling effort and speed to suit different terrains and riding conditions. Smaller sprockets provide easier pedaling for climbing steep hills, while larger sprockets offer higher speeds on flat or downhill sections.

Beyond bicycles, the wheel sprocket system is widely used in various other vehicles and machinery to transmit power and control speed. It can be found in motorcycles, mopeds, electric scooters, and even some small electric vehicles. Additionally, the wheel sprocket system is prevalent in industrial machinery, where precise speed control and torque transmission are essential.

The efficiency and reliability of the wheel sprocket system make it a versatile and practical choice for many vehicles and mechanical applications.

China Best Sales Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket  China Best Sales Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket
editor by Dream 2024-05-06

China OEM High Quality Machinery Agricultural Sprocket Chains and Industrial Transmission Parts Wheels Sprockets

Product Description

ZHangZhoug CZPT Machinery Co., Ltd
(DIN/ANSI/JIS Standard or made to drawing)
Product Description:

Detailed Photos:

Company Profile:

ZHangZhoug CZPT Machinery Co., Ltd. Is the vice chairman of chain Transmission Branch of China Machinery General parts Industry Association and a member of China chain Transmission Standardization Technical Committee.

Founded in 1954, mainly engaged in sprocket, gear, timing belt pulley, coupling production and sales, It is a large sprocket manufacturing enterprise in China, and it is also 1 of the largest standard sprocket manufacturers in the world at present. The product structure of the company has been developed from the single pattern of standard sprocket to non-standard transmission parts. Products are mainly sold in North America, South America, Europe, Africa and Japan, South Korea, the Middle East, Russia and Southeast Asia and other countries and regions, sales network all over the world.

The company has passed ISO 9002 quality assurance system certification for the first time in 1999, ISO9001: 2000 quality management system certification in 2003, ISO/TS16949 quality management system certification for the first time in 2009, ISO14001: 2004 environmental management system certification for the first time in 2571, ISO14001: 2015 environmental management system certification for 2017, and ISO9001: 2015 and IATF16949: 2016 quality management system certification for 2018. It lays a CZPT foundation for perfecting the internal management of the enterprise and opening up the external market.

The company adheres to the business philosophy of “Quality is life, technology is physique, delivery is moral, quantity is credit, service is kindred, cost is lifetime”, implementing “innovation-driven, twinning integration” upgrading strategy, promoting chain transmission products to excellence, and making every effort to create “harmonious cenfit, good quality cenfit, hundred years of cenfit”

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: C45
Customization:
Available

|

Customized Request

wheel sprocket

Factors Affecting the Efficiency of a wheel sprocket Setup

Several factors can influence the efficiency of a wheel sprocket system in power transmission and motion control applications. These factors should be carefully considered and optimized to ensure the system’s overall effectiveness and performance:

  • 1. Friction: Friction between the wheel, sprocket, and the chain or belt can lead to energy losses. Using high-quality materials and lubrication can help reduce friction and improve efficiency.
  • 2. Alignment: Proper alignment between the wheel and the sprocket is critical. Misalignment can cause increased wear, noise, and reduced efficiency. Regular maintenance and alignment checks are essential.
  • 3. Tension: The correct tension in the chain or belt is crucial for efficient power transmission. Too loose or too tight tension can lead to performance issues and premature wear.
  • 4. Material and Design: The choice of materials for the wheel sprocket, as well as their design, can impact efficiency. High-quality materials and well-engineered components reduce wear and improve overall system performance.
  • 5. Load Distribution: Uneven load distribution across the wheel sprocket can lead to localized wear and decreased efficiency. Ensuring proper load distribution helps maintain uniform wear and power transmission.
  • 6. Environmental Factors: Harsh environmental conditions, such as dust, moisture, and extreme temperatures, can affect the efficiency of the system. Choosing suitable materials and implementing protective measures can mitigate these effects.
  • 7. Maintenance: Regular maintenance, including lubrication, inspection, and timely replacement of worn components, is vital for the long-term efficiency of the system.
  • 8. Speed and Torque: The operating speed and torque requirements of the application should be considered when selecting the appropriate wheel sprocket size and specifications.
  • 9. Chain or Belt Type: Different types of chains or belts, such as roller chains, silent chains, or toothed belts, have varying efficiencies. Choosing the right type for the specific application is crucial.
  • 10. System Integration: The wheel sprocket system should be integrated correctly with other components in the machinery to ensure smooth operation and minimal energy losses.

By carefully considering and optimizing these factors, it is possible to improve the efficiency of the wheel sprocket system, leading to reduced energy consumption, less wear and tear, and overall better performance.

wheel sprocket

Temperature Limits for wheel sprocket System’s Operation

The temperature limits for a wheel sprocket system’s operation depend on the materials used in the construction of the components. Different materials have varying temperature tolerances, and exceeding these limits can lead to reduced performance, premature wear, and even system failure.

Here are some common materials used in wheel sprocket systems and their general temperature limits:

  • Steel: Steel sprockets and wheels, which are widely used in many applications, typically have a temperature limit ranging from -40°C to 500°C (-40°F to 932°F). However, the specific temperature range may vary based on the grade of steel and any coatings or treatments applied.
  • Stainless Steel: Stainless steel sprockets and wheels offer improved corrosion resistance and can withstand higher temperatures than regular steel. Their temperature limit is typically between -100°C to 600°C (-148°F to 1112°F).
  • Plastics: Plastic sprockets and wheels are commonly used in low-load and low-speed applications. The temperature limit for plastic components varies widely depending on the type of plastic used. In general, it can range from -40°C to 150°C (-40°F to 302°F).
  • Aluminum: Aluminum sprockets and wheels have a temperature limit of approximately -40°C to 250°C (-40°F to 482°F). They are often used in applications where weight reduction is critical.

It’s essential to consult the manufacturer’s specifications and material data sheets for the specific components used in the wheel sprocket system to determine their temperature limits accurately. Factors such as load, speed, and environmental conditions can also influence the actual temperature tolerance of the system.

When operating a wheel sprocket system near its temperature limits, regular monitoring and maintenance are necessary to ensure the components’ integrity and overall system performance. If the application involves extreme temperatures beyond the typical limits of the materials, specialized high-temperature materials or cooling measures may be required to maintain reliable operation.

wheel sprocket

Advantages of Using a wheel sprocket Configuration

Using a wheel sprocket configuration for power transmission offers several advantages over other methods. Here are some key benefits:

1. Efficient Power Transmission:

The wheel sprocket assembly provide a highly efficient method of transmitting power between shafts with minimal energy loss. The teeth of the sprocket mesh with the links of the chain or the teeth of another sprocket, ensuring a positive engagement that reduces slippage and maximizes power transfer.

2. Versatility:

Wheels and sprockets are available in various sizes, configurations, and materials, making them highly versatile components for different applications. They can accommodate a wide range of speed and torque requirements, making them suitable for various mechanical systems.

3. Compact Design:

The compact design of wheel sprocket assemblies allows for space-saving installations in machinery. The concentric arrangement of the components minimizes the overall footprint, making it ideal for applications with limited space.

4. Precise Speed Control:

By selecting sprockets with different numbers of teeth, the gear ratio can be easily adjusted to achieve precise speed control in the driven shaft. This level of control is essential for many applications, such as conveyor systems, where different speeds are required for different processes.

5. High Torque Capacity:

wheel sprocket systems can handle high torque loads, making them suitable for heavy-duty applications. This high torque capacity is especially beneficial in industrial settings where large loads need to be moved or lifted.

6. Smooth and Quiet Operation:

When properly lubricated and maintained, the interaction between the sprocket and the chain or other sprockets results in smooth and quiet operation. This makes wheel sprocket systems preferable in applications where noise reduction is important.

7. Easy Installation and Maintenance:

Installing a wheel sprocket assembly is relatively straightforward, and they require minimal maintenance when used correctly. Periodic lubrication and tension adjustments are typically all that is needed to keep the system running smoothly.

8. Suitable for High-Speed Applications:

wheel sprocket configurations are well-suited for high-speed applications where belts or gears may not be as practical due to limitations in speed capabilities.

In summary, the wheel sprocket configuration offers efficient power transmission, versatility, compactness, precise speed control, high torque capacity, smooth operation, and ease of installation and maintenance. These advantages make it a popular choice in a wide range of mechanical systems and industrial applications.

China OEM High Quality Machinery Agricultural Sprocket Chains and Industrial Transmission Parts Wheels Sprockets  China OEM High Quality Machinery Agricultural Sprocket Chains and Industrial Transmission Parts Wheels Sprockets
editor by Dream 2024-04-26

China Professional High Quality Machinery Agricultural Sprocket Chains and Industrial Transmission Parts Wheels Sprockets

Product Description

ZHangZhoug CZPT Machinery Co., Ltd
(DIN/ANSI/JIS Standard or made to drawing)
Product Description:

Detailed Photos:

Company Profile:

ZHangZhoug CZPT Machinery Co., Ltd. Is the vice chairman of chain Transmission Branch of China Machinery General parts Industry Association and a member of China chain Transmission Standardization Technical Committee.

Founded in 1954, mainly engaged in sprocket, gear, timing belt pulley, coupling production and sales, It is a large sprocket manufacturing enterprise in China, and it is also 1 of the largest standard sprocket manufacturers in the world at present. The product structure of the company has been developed from the single pattern of standard sprocket to non-standard transmission parts. Products are mainly sold in North America, South America, Europe, Africa and Japan, South Korea, the Middle East, Russia and Southeast Asia and other countries and regions, sales network all over the world.

The company has passed ISO 9002 quality assurance system certification for the first time in 1999, ISO9001: 2000 quality management system certification in 2003, ISO/TS16949 quality management system certification for the first time in 2009, ISO14001: 2004 environmental management system certification for the first time in 2571, ISO14001: 2015 environmental management system certification for 2017, and ISO9001: 2015 and IATF16949: 2016 quality management system certification for 2018. It lays a CZPT foundation for perfecting the internal management of the enterprise and opening up the external market.

The company adheres to the business philosophy of “Quality is life, technology is physique, delivery is moral, quantity is credit, service is kindred, cost is lifetime”, implementing “innovation-driven, twinning integration” upgrading strategy, promoting chain transmission products to excellence, and making every effort to create “harmonious cenfit, good quality cenfit, hundred years of cenfit”

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: C45
Customization:
Available

|

Customized Request

wheel sprocket

Ensuring Proper Alignment between a Wheel and its Corresponding Sprocket

Proper alignment between a wheel and its corresponding sprocket is crucial for the smooth and efficient operation of the wheel sprocket system. Misalignment can lead to increased wear, noise, and reduced performance. Here are some steps to ensure proper alignment:

  • Use Precision Components: Ensure that both the wheel sprocket are high-quality, precision-manufactured components that meet the required specifications. Using well-machined components will aid in achieving better alignment.
  • Check Axle Alignment: Make sure the axle or shaft on which the wheel sprocket are mounted is straight and properly aligned. Any misalignment in the axle can lead to misalignment of the wheel sprocket.
  • Proper Mounting: Ensure that the wheel sprocket are securely and correctly mounted on the axle or shaft. Use appropriate fasteners and tightening techniques to prevent any movement or shifting during operation.
  • Check for Parallelism: The axes of the wheel sprocket should be parallel to each other. Measure the distance between the axes at multiple points to verify parallel alignment.
  • Use Alignment Tools: Alignment tools, such as laser alignment systems, can be employed to accurately align the wheel sprocket. These tools can help identify and correct misalignments effectively.
  • Check Tension and Tensioner Alignment: If a tensioner is used in the system, ensure that it is properly aligned and applying the right tension to the chain or belt. Incorrect tension can cause misalignment.
  • Regular Maintenance: Implement a regular maintenance schedule to check and adjust alignment as needed. Regular inspections can help identify and address alignment issues before they cause significant problems.
  • Monitor Performance: Keep an eye on the performance of the wheel sprocket system. Unusual noises, vibrations, or signs of wear can indicate misalignment and should be investigated promptly.

Proper alignment is essential for the long-term performance and reliability of the wheel sprocket system. By following these steps and conducting regular maintenance, you can ensure that the wheel sprocket work together harmoniously, providing efficient power transmission and minimizing wear and tear.

wheel sprocket

Inspecting a wheel sprocket for Wear and Tear

Regular inspection of the wheel sprocket is essential to ensure their proper functioning and to identify any signs of wear and tear. Here are the steps to inspect a wheel sprocket:

  1. Visual Inspection: Start by visually examining the wheel sprocket for any visible signs of wear, damage, or deformation. Look for cracks, chips, dents, or any irregularities on the surface of both components.
  2. Check for Misalignment: Verify that the wheel sprocket are properly aligned with each other. Misalignment can lead to accelerated wear and affect the overall performance of the system.
  3. Measure Wear: Use calipers or a wear gauge to measure the sprocket’s tooth profile and the wheel’s rolling surface. Compare these measurements with the original specifications to determine if significant wear has occurred.
  4. Inspect Teeth and Chain Engagement: If the wheel sprocket are part of a chain drive system, closely examine the sprocket teeth and chain engagement. Worn or elongated teeth can cause poor chain engagement and lead to premature failure.
  5. Lubrication: Check the lubrication of the wheel sprocket. Insufficient or excessive lubrication can cause increased friction, leading to wear and reduced efficiency.
  6. Bearing Condition: If the wheel is mounted on a shaft with bearings, inspect the bearings for any signs of wear, noise, or rough movement. Properly functioning bearings are crucial for the smooth operation of the system.
  7. Inspect Mounting Hardware: Ensure that all nuts, bolts, and other mounting hardware are securely tightened. Loose fasteners can cause vibration and misalignment issues.
  8. Check for Contaminants: Remove any debris, dirt, or foreign particles that may have accumulated on the wheel or sprocket. Contaminants can accelerate wear and damage the components.
  9. Replacement or Maintenance: Based on the inspection results, determine if any parts need replacement or if maintenance is required. Address any issues promptly to prevent further damage and maintain the system’s performance.

Regularly scheduled inspections and maintenance can help prolong the lifespan of the wheel sprocket assembly, optimize performance, and ensure the safety of the mechanical system.

wheel sprocket

Eco-Friendly Materials for Manufacturing Wheels and Sprockets

Yes, there are eco-friendly materials used for manufacturing wheels and sprockets. As industries strive to reduce their environmental impact and promote sustainability, manufacturers are exploring alternative materials that are more environmentally friendly. Some of the eco-friendly materials used for manufacturing wheels and sprockets include:

1. Recycled Materials:

Using recycled materials, such as recycled plastic or metal, can significantly reduce the demand for virgin raw materials and lower the overall carbon footprint. These materials are obtained from post-consumer or post-industrial waste and processed to create new products, reducing the need for new resource extraction.

2. Biodegradable Materials:

Biodegradable plastics, such as PLA (polylactic acid) and PHA (polyhydroxyalkanoates), are derived from renewable plant sources and can break down naturally in the environment. These materials are gaining popularity for applications where disposal or end-of-life considerations are critical.

3. Sustainable Composites:

Manufacturers are developing sustainable composite materials that combine renewable fibers, such as bamboo, hemp, or flax, with biodegradable resins. These composites offer good strength and rigidity while being more environmentally friendly compared to traditional fiber-reinforced plastics.

4. Natural Materials:

In some cases, natural materials like wood or bamboo are used to create sprockets and wheels for specific applications. These materials are renewable and biodegradable, making them a more sustainable choice.

5. Low-Toxicity Materials:

Some eco-friendly materials focus on reducing the use of harmful chemicals during manufacturing. Low-toxicity materials are not only better for the environment but also for the health and safety of workers involved in the production process.

When selecting eco-friendly materials for wheels and sprockets, it’s essential to consider factors such as the specific application, load-bearing requirements, and the material’s end-of-life characteristics. Manufacturers and users can contribute to environmental sustainability by opting for these eco-friendly alternatives in their machinery and equipment.

China Professional High Quality Machinery Agricultural Sprocket Chains and Industrial Transmission Parts Wheels Sprockets  China Professional High Quality Machinery Agricultural Sprocket Chains and Industrial Transmission Parts Wheels Sprockets
editor by Dream 2024-04-25

China wholesaler Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket

Product Description

Product Parameters

Company Profile

-HangZhou Choho Industrial Co., Ltd. is a leading company in the domestic chain transmission industry. the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise, and the first A-share listed company in China’s chain drive industry. The stock code is 003033.
-Relying on industry-leading R&D technology, product quality and service, CHOHO has achieved plenty of high-quality customers. We supply vehicle chain system products for CZPT vehicle manufacturers such as Honda, Yamaha, Suzuki, DaHangZhouang, CF MOTOR, HangZhou Motorcycles, Knorr-Bremse etc.; Supply agricultural chain system products for CZPT agricultural machinery manufacturers at home and abroad, such as German CLASS and LOVOL; Supply industrial equipment chain system products for CZPT enterprises such as ZheJiang HangZhouan, HangZhou Logistics, HangZhou Kejie and Sinsong Robotics. The trademark has been registered in many countries, and the products are exported to a great number of countries and regions in Europe, America, Southeast Asia, South America, Africa etc., serving more than 3,000 after-sales customers.

Production Capacity Equipment

-By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.

Our Advantages

1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.

Product Advantages

HangZhou CHOHO possesses advanced manufacture equipments such as high precision machining center, hold-in program control broacher, Japan CNC lathe, South Korea CNC lathe, ZheJiang CNC hobbing machine, ZheJiang CNC gear shaping machine, unique spray cooling technology double station high frequency quenching furnace,honing machine tool, laser marking machine to develop large scale, high quality , professional and stable process. inspection instruments such as metallographic test machine, chemical analysis machine, fatigue test machine, projection and wearing test machine to make sure each sprocket we sold have reliable quality.
 

Certifications

-CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.

Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!

Broad Customer Channels  Market Continues to Develop!

International Exhibition

CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!

 

Packaging & Shipping

Packaging Details: Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization

 

We are very close to the port of HangZhou, which saves a lot of logistics costs and transportation time!
 

We have our own logistics company and transportation department. If you need me to deliver goods to your warehouse or other ports in China, such as ZheJiang Port and ZheJiang Port, we can also do it!

Related Products:

 

FAQ:
1. Are you a Manufacturer or Trade Company?
    -We are a factory focused on producing and exporting Chains for over 36 years and have a professional international trade team.
2. What terms of payment do you usually use?
    -T/T term 30% in advance,70% balance before shipment. Show your products and packaging before shipping.
3. What is your lead time for your goods?
    -Normally 1~45 days depending on order quantity & Spec, Stock can be shipped immediately.
4. Do you attend any Shows?
    -We attend the Hannover Messe, Bologna Fair, Canton Fair, AMTS, VIV ASIA, CIAME, Motor China, PTC Asia, Frankfurt Auto Parts, and other world-famous exhibitions!
5. Do you offer free samples?
   -Yes, we can. or you just bear the shipping cost.
6. Is OEM available?
   -Yes, OEM is available. 
7. What are your major products?
   -Our main products are all kinds of Automobile Chain Systems, Motorcycle Chain Systems, Industrial Chain Systems, Agricultural Chain Systems, Bicycle chain Systems, Saw Chains, and Vessel Chain.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CCC, ISO9001, CE, E-Mark, RoHS, TS16949, TUV/SGS/BV/CE
Standard Component: Non-Standard Component
Technics: Nc Maching
Samples:
US$ 4.99/Piece
1 Piece(Min.Order)

|

Order Sample

Sprocket Samples
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Alternatives to Chain Sprockets in wheel sprocket Configuration

While chain sprockets are commonly used in wheel sprocket configurations, there are alternative methods for power transmission in various applications:

  • Gear and Gear Rack: Gears are toothed wheels that mesh with each other to transmit power. Instead of using a chain and sprocket, gears can directly engage with each other, offering a smooth and efficient power transfer. Gear racks, which are linear gears, can be used in place of wheels for linear motion applications.
  • Belt and Pulley: Belts and pulleys offer a flexible and quiet means of power transmission. They work similarly to chain and sprocket systems but use belts instead of chains. Pulleys have grooves that grip the belt, allowing power to be transferred between the pulleys.
  • Gear Train: A gear train consists of multiple gears meshed together to achieve specific speed and torque ratios. Gear trains are often used in complex machinery and mechanical systems where precise power transmission is required.
  • Direct Drive: In some applications, direct drive mechanisms can be used, where the motor or power source is directly connected to the wheel or load without any intermediate components like sprockets or gears.
  • Friction Drive: Friction drive systems use the friction between two surfaces to transfer power. One surface, such as a rubber wheel, is pressed against another surface to achieve power transmission.

The choice of alternative power transmission methods depends on various factors, including the application requirements, available space, speed, torque, and efficiency considerations. Each alternative method has its advantages and limitations, and the selection should be based on the specific needs of the mechanical system.

When considering alternatives to chain sprockets, it is essential to analyze the requirements of your application and consult with engineering experts or manufacturers to determine the most suitable method of power transmission for optimal performance and longevity.

wheel sprocket

Using a Belt Sprocket in Place of a Chain Sprocket with a Wheel

Yes, in many cases, a belt sprocket can be used in place of a chain sprocket with a wheel, provided that the system is designed to accommodate the change.

Both chain sprockets and belt sprockets serve the same fundamental purpose of transferring rotational motion and power between the wheel and the driven component. However, there are some important considerations to keep in mind when replacing a chain sprocket with a belt sprocket:

  • Alignment: Belt sprockets and chain sprockets must be aligned properly with the wheel to ensure smooth and efficient power transmission. Any misalignment can cause premature wear and reduce the system’s overall performance.
  • Tension: Chain-driven systems require specific tension to prevent slack and maintain proper engagement between the sprockets and the chain. Belt-driven systems, on the other hand, require appropriate tension to prevent slippage. Ensuring the correct tension for the specific type of sprocket is crucial for reliable operation.
  • Load Capacity: Consider the load capacity and torque requirements of the system when selecting a belt sprocket. Belt sprockets may have different load-carrying capabilities compared to chain sprockets, and using the wrong type can lead to premature wear or failure.
  • Speed and RPM: Belt-driven systems may have different operating speeds and RPM limits compared to chain-driven systems. Ensure that the selected belt sprocket can handle the desired rotational speed without exceeding its design limitations.
  • System Design: Changing from a chain-driven system to a belt-driven system (or vice versa) may require modifications to the overall system design, including the size of the sprockets and the layout of the system. Consult with an engineer or a qualified professional to ensure that the replacement is appropriate and safe.

Overall, replacing a chain sprocket with a belt sprocket can be a viable option in certain applications. However, it’s essential to consider the factors mentioned above and evaluate the compatibility of the new sprocket with the existing system to achieve optimal performance and longevity.

wheel sprocket

Eco-Friendly Materials for Manufacturing Wheels and Sprockets

Yes, there are eco-friendly materials used for manufacturing wheels and sprockets. As industries strive to reduce their environmental impact and promote sustainability, manufacturers are exploring alternative materials that are more environmentally friendly. Some of the eco-friendly materials used for manufacturing wheels and sprockets include:

1. Recycled Materials:

Using recycled materials, such as recycled plastic or metal, can significantly reduce the demand for virgin raw materials and lower the overall carbon footprint. These materials are obtained from post-consumer or post-industrial waste and processed to create new products, reducing the need for new resource extraction.

2. Biodegradable Materials:

Biodegradable plastics, such as PLA (polylactic acid) and PHA (polyhydroxyalkanoates), are derived from renewable plant sources and can break down naturally in the environment. These materials are gaining popularity for applications where disposal or end-of-life considerations are critical.

3. Sustainable Composites:

Manufacturers are developing sustainable composite materials that combine renewable fibers, such as bamboo, hemp, or flax, with biodegradable resins. These composites offer good strength and rigidity while being more environmentally friendly compared to traditional fiber-reinforced plastics.

4. Natural Materials:

In some cases, natural materials like wood or bamboo are used to create sprockets and wheels for specific applications. These materials are renewable and biodegradable, making them a more sustainable choice.

5. Low-Toxicity Materials:

Some eco-friendly materials focus on reducing the use of harmful chemicals during manufacturing. Low-toxicity materials are not only better for the environment but also for the health and safety of workers involved in the production process.

When selecting eco-friendly materials for wheels and sprockets, it’s essential to consider factors such as the specific application, load-bearing requirements, and the material’s end-of-life characteristics. Manufacturers and users can contribute to environmental sustainability by opting for these eco-friendly alternatives in their machinery and equipment.

China wholesaler Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket  China wholesaler Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket
editor by Dream 2024-04-24

China high quality High Quality Industrial Carbon Stainless Steel Roller Chain Sprocket and Set OEM

Product Description

1) A series chains:
A) Simplex: 25-1 ~ 240-1
B) Duplex: 25-2 ~ 240-2
C) Triplex: 35-3 ~ 240-3
D) Quadruplex: 40-4 ~ 240-4
E) Quintuple: 40-5 ~ 240-5
F) Sextuple: 40-6 ~ 240-6
G) Octuple: 40-8 ~ 240-8
2) B series chains:
A) Simplex: 04B-1 ~ 48B-1
B) Duplex: 04B-2 ~ 48B-2
C) Triplex: 06B-3 ~ 48B-3
D) Quadruplex: 08B-4 ~ 48B-4
E) Quintuple: 08B-5 ~ 48B-5
F) Sextuple: 08B-6 ~ 48B-6
G) Octuple: 08B-8 ~ 48B-8
3) Colors available: Natural, yellow, blue, black
4) Materials: Alloy, Carbon steel, stainless steel
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Transmission Chain
Material: Alloy
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*11/128"
Structure: Roller Chain
Customization:
Available

|

Customized Request

wheel sprocket

Ensuring Proper Alignment between a Wheel and its Corresponding Sprocket

Proper alignment between a wheel and its corresponding sprocket is crucial for the smooth and efficient operation of the wheel sprocket system. Misalignment can lead to increased wear, noise, and reduced performance. Here are some steps to ensure proper alignment:

  • Use Precision Components: Ensure that both the wheel sprocket are high-quality, precision-manufactured components that meet the required specifications. Using well-machined components will aid in achieving better alignment.
  • Check Axle Alignment: Make sure the axle or shaft on which the wheel sprocket are mounted is straight and properly aligned. Any misalignment in the axle can lead to misalignment of the wheel sprocket.
  • Proper Mounting: Ensure that the wheel sprocket are securely and correctly mounted on the axle or shaft. Use appropriate fasteners and tightening techniques to prevent any movement or shifting during operation.
  • Check for Parallelism: The axes of the wheel sprocket should be parallel to each other. Measure the distance between the axes at multiple points to verify parallel alignment.
  • Use Alignment Tools: Alignment tools, such as laser alignment systems, can be employed to accurately align the wheel sprocket. These tools can help identify and correct misalignments effectively.
  • Check Tension and Tensioner Alignment: If a tensioner is used in the system, ensure that it is properly aligned and applying the right tension to the chain or belt. Incorrect tension can cause misalignment.
  • Regular Maintenance: Implement a regular maintenance schedule to check and adjust alignment as needed. Regular inspections can help identify and address alignment issues before they cause significant problems.
  • Monitor Performance: Keep an eye on the performance of the wheel sprocket system. Unusual noises, vibrations, or signs of wear can indicate misalignment and should be investigated promptly.

Proper alignment is essential for the long-term performance and reliability of the wheel sprocket system. By following these steps and conducting regular maintenance, you can ensure that the wheel sprocket work together harmoniously, providing efficient power transmission and minimizing wear and tear.

wheel sprocket

Vertical Power Transmission with wheel sprocket System

Yes, a wheel sprocket system can be used for vertical power transmission. In such cases, the system is designed to transmit power and motion between vertically aligned shafts. Vertical power transmission using a wheel sprocket assembly follows similar principles to horizontal transmission, but there are some factors to consider:

  1. Load and Torque: When transmitting power vertically, the weight of the load can significantly impact the torque requirements. The torque must be sufficient to lift the load against gravity while accounting for friction and other resistive forces.
  2. Sprocket Selection: Choosing the right sprocket is critical for vertical transmission. The sprocket teeth must be designed to engage the chain or belt effectively and prevent slipping, especially when lifting heavy loads.
  3. Lubrication: Proper lubrication is essential to reduce friction and wear in the system. Vertical applications may require specific lubricants to ensure smooth operation and prevent premature failure.
  4. Tensioning: Maintaining the correct tension in the chain or belt is crucial for vertical power transmission. Proper tension helps prevent sagging and ensures proper engagement between the wheel sprocket.
  5. Overhung Load: In vertical setups, the weight of the sprocket and shaft assembly can impose an overhung load on the bearings. Adequate support and bearing selection are necessary to handle this load.

Vertical power transmission with a wheel sprocket system is commonly used in various applications, including conveyor systems, elevators, and some industrial machinery. Proper design, installation, and maintenance are essential to ensure safe and efficient operation in vertical configurations.

wheel sprocket

Eco-Friendly Materials for Manufacturing Wheels and Sprockets

Yes, there are eco-friendly materials used for manufacturing wheels and sprockets. As industries strive to reduce their environmental impact and promote sustainability, manufacturers are exploring alternative materials that are more environmentally friendly. Some of the eco-friendly materials used for manufacturing wheels and sprockets include:

1. Recycled Materials:

Using recycled materials, such as recycled plastic or metal, can significantly reduce the demand for virgin raw materials and lower the overall carbon footprint. These materials are obtained from post-consumer or post-industrial waste and processed to create new products, reducing the need for new resource extraction.

2. Biodegradable Materials:

Biodegradable plastics, such as PLA (polylactic acid) and PHA (polyhydroxyalkanoates), are derived from renewable plant sources and can break down naturally in the environment. These materials are gaining popularity for applications where disposal or end-of-life considerations are critical.

3. Sustainable Composites:

Manufacturers are developing sustainable composite materials that combine renewable fibers, such as bamboo, hemp, or flax, with biodegradable resins. These composites offer good strength and rigidity while being more environmentally friendly compared to traditional fiber-reinforced plastics.

4. Natural Materials:

In some cases, natural materials like wood or bamboo are used to create sprockets and wheels for specific applications. These materials are renewable and biodegradable, making them a more sustainable choice.

5. Low-Toxicity Materials:

Some eco-friendly materials focus on reducing the use of harmful chemicals during manufacturing. Low-toxicity materials are not only better for the environment but also for the health and safety of workers involved in the production process.

When selecting eco-friendly materials for wheels and sprockets, it’s essential to consider factors such as the specific application, load-bearing requirements, and the material’s end-of-life characteristics. Manufacturers and users can contribute to environmental sustainability by opting for these eco-friendly alternatives in their machinery and equipment.

China high quality High Quality Industrial Carbon Stainless Steel Roller Chain Sprocket and Set OEM  China high quality High Quality Industrial Carbon Stainless Steel Roller Chain Sprocket and Set OEM
editor by Dream 2024-04-23

China wholesaler Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket

Product Description

Product Parameters

Company Profile

-HangZhou Choho Industrial Co., Ltd. is a leading company in the domestic chain transmission industry. the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise, and the first A-share listed company in China’s chain drive industry. The stock code is 003033.
-Relying on industry-leading R&D technology, product quality and service, CHOHO has achieved plenty of high-quality customers. We supply vehicle chain system products for CZPT vehicle manufacturers such as Honda, Yamaha, Suzuki, DaHangZhouang, CF MOTOR, HangZhou Motorcycles, Knorr-Bremse etc.; Supply agricultural chain system products for CZPT agricultural machinery manufacturers at home and abroad, such as German CLASS and LOVOL; Supply industrial equipment chain system products for CZPT enterprises such as ZheJiang HangZhouan, HangZhou Logistics, HangZhou Kejie and Sinsong Robotics. The trademark has been registered in many countries, and the products are exported to a great number of countries and regions in Europe, America, Southeast Asia, South America, Africa etc., serving more than 3,000 after-sales customers.

Production Capacity Equipment

-By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.

Our Advantages

1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.

Product Advantages

HangZhou CHOHO possesses advanced manufacture equipments such as high precision machining center, hold-in program control broacher, Japan CNC lathe, South Korea CNC lathe, ZheJiang CNC hobbing machine, ZheJiang CNC gear shaping machine, unique spray cooling technology double station high frequency quenching furnace,honing machine tool, laser marking machine to develop large scale, high quality , professional and stable process. inspection instruments such as metallographic test machine, chemical analysis machine, fatigue test machine, projection and wearing test machine to make sure each sprocket we sold have reliable quality.
 

Certifications

-CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.

Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!

Broad Customer Channels  Market Continues to Develop!

International Exhibition

CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!

 

Packaging & Shipping

Packaging Details: Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization

 

We are very close to the port of HangZhou, which saves a lot of logistics costs and transportation time!
 

We have our own logistics company and transportation department. If you need me to deliver goods to your warehouse or other ports in China, such as ZheJiang Port and ZheJiang Port, we can also do it!

Related Products:

 

FAQ:
1. Are you a Manufacturer or Trade Company?
    -We are a factory focused on producing and exporting Chains for over 36 years and have a professional international trade team.
2. What terms of payment do you usually use?
    -T/T term 30% in advance,70% balance before shipment. Show your products and packaging before shipping.
3. What is your lead time for your goods?
    -Normally 1~45 days depending on order quantity & Spec, Stock can be shipped immediately.
4. Do you attend any Shows?
    -We attend the Hannover Messe, Bologna Fair, Canton Fair, AMTS, VIV ASIA, CIAME, Motor China, PTC Asia, Frankfurt Auto Parts, and other world-famous exhibitions!
5. Do you offer free samples?
   -Yes, we can. or you just bear the shipping cost.
6. Is OEM available?
   -Yes, OEM is available. 
7. What are your major products?
   -Our main products are all kinds of Automobile Chain Systems, Motorcycle Chain Systems, Industrial Chain Systems, Agricultural Chain Systems, Bicycle chain Systems, Saw Chains, and Vessel Chain.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CCC, ISO9001, CE, E-Mark, RoHS, TS16949, TUV/SGS/BV/CE
Standard Component: Non-Standard Component
Technics: Nc Maching
Samples:
US$ 4.99/Piece
1 Piece(Min.Order)

|

Order Sample

Sprocket Samples
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Alternatives to Chain Sprockets in wheel sprocket Configuration

While chain sprockets are commonly used in wheel sprocket configurations, there are alternative methods for power transmission in various applications:

  • Gear and Gear Rack: Gears are toothed wheels that mesh with each other to transmit power. Instead of using a chain and sprocket, gears can directly engage with each other, offering a smooth and efficient power transfer. Gear racks, which are linear gears, can be used in place of wheels for linear motion applications.
  • Belt and Pulley: Belts and pulleys offer a flexible and quiet means of power transmission. They work similarly to chain and sprocket systems but use belts instead of chains. Pulleys have grooves that grip the belt, allowing power to be transferred between the pulleys.
  • Gear Train: A gear train consists of multiple gears meshed together to achieve specific speed and torque ratios. Gear trains are often used in complex machinery and mechanical systems where precise power transmission is required.
  • Direct Drive: In some applications, direct drive mechanisms can be used, where the motor or power source is directly connected to the wheel or load without any intermediate components like sprockets or gears.
  • Friction Drive: Friction drive systems use the friction between two surfaces to transfer power. One surface, such as a rubber wheel, is pressed against another surface to achieve power transmission.

The choice of alternative power transmission methods depends on various factors, including the application requirements, available space, speed, torque, and efficiency considerations. Each alternative method has its advantages and limitations, and the selection should be based on the specific needs of the mechanical system.

When considering alternatives to chain sprockets, it is essential to analyze the requirements of your application and consult with engineering experts or manufacturers to determine the most suitable method of power transmission for optimal performance and longevity.

wheel sprocket

Load-Carrying Capacities of wheel sprocket Combinations

The load-carrying capacity of a wheel sprocket assembly depends on various factors, including the material, size, and design of both the wheel sprocket. Here are some common types of wheel sprocket combinations and their load-carrying capacities:

  • Steel Wheel with Steel Sprocket: This combination offers high load-carrying capacity and is commonly used in heavy-duty applications. Steel wheels can handle substantial loads, and when paired with steel sprockets, the assembly can withstand even higher forces.
  • Nylon Wheel with Steel Sprocket: Nylon wheels are known for their lightweight and durable nature. When combined with steel sprockets, they provide a good load-carrying capacity while reducing the overall weight of the assembly.
  • Polyurethane Wheel with Steel Sprocket: Polyurethane wheels offer excellent wear resistance and are suitable for medium to heavy loads. When paired with steel sprockets, this combination can handle moderate to high load capacities.
  • Rubber Wheel with Cast Iron Sprocket: Rubber wheels are known for their shock-absorbing properties and are often used in applications requiring vibration dampening. When used with cast iron sprockets, this combination can handle medium loads.
  • Plastic Wheel with Plastic Sprocket: This combination is suitable for light-duty applications where lower loads are expected. Plastic wheels and sprockets are often used in applications that require low friction and quiet operation.
  • Custom wheel sprocket Combinations: In some cases, custom wheel sprocket combinations are designed to meet specific load-carrying requirements. These combinations can be tailored to suit the application’s unique demands.

It’s important to note that load-carrying capacities also depend on other factors, such as the type of bearing used in the wheel, the shaft material, and the overall design of the mechanical system. Engineers should carefully consider the intended application, operating conditions, and safety factors when selecting the appropriate wheel sprocket combination to ensure optimal performance and longevity of the system.

wheel sprocket

Types of Sprockets Used with Wheels

In mechanical systems, sprockets are toothed wheels that mesh with a chain or a belt to transmit rotational motion and power. There are several types of sprockets used with wheels, each designed for specific applications:

1. Roller Chain Sprockets:

These are the most common type of sprockets used with wheels and are designed to work with roller chains. Roller chain sprockets have teeth that match the profile of the chain’s rollers, ensuring smooth engagement and reducing wear on both the sprocket and the chain. They are widely used in bicycles, motorcycles, and industrial machinery.

2. Silent Chain Sprockets:

Also known as inverted-tooth chain sprockets, these sprockets are designed to work with silent chains. Silent chains are toothed chains that run quietly and smoothly, making them ideal for applications where noise reduction is essential, such as timing drives in engines and automotive systems.

3. Timing Belt Sprockets:

Timing belt sprockets are used with timing belts to ensure precise synchronization between the crankshaft and camshaft in internal combustion engines. They have specially designed teeth that fit the profile of the timing belt, allowing for accurate timing and smooth motion.

4. Idler Sprockets:

Idler sprockets are used to guide and tension chains or belts in a system. They do not transmit power themselves but play a crucial role in maintaining proper tension and alignment, which is essential for efficient power transmission and to prevent chain or belt slack.

5. Weld-On Sprockets:

Weld-on sprockets are designed to be welded directly onto a wheel hub or shaft, providing a secure and permanent attachment. They are commonly used in industrial machinery and equipment.

6. Double-Single Sprockets:

Double-single sprockets, also known as duplex sprockets, have two sets of teeth on one sprocket body. They are used when two separate chains need to be driven at the same speed and with the same sprocket ratio, often found in heavy-duty applications and conveyor systems.

7. Taper-Lock Sprockets:

Taper-lock sprockets are designed with a taper and keyway to provide a secure and easy-to-install connection to the shaft. They are widely used in power transmission systems, where sprocket positioning and removal are frequent.

Each type of sprocket is selected based on the specific application’s requirements, chain or belt type, and the desired performance characteristics. Proper selection and maintenance of sprockets are essential for ensuring efficient power transmission and extending the life of the entire system.

China wholesaler Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket  China wholesaler Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket
editor by CX 2024-04-16

China Best Sales Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket

Product Description

Product Parameters

Company Profile

-HangZhou Choho Industrial Co., Ltd. is a leading company in the domestic chain transmission industry. the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise, and the first A-share listed company in China’s chain drive industry. The stock code is 003033.
-Relying on industry-leading R&D technology, product quality and service, CHOHO has achieved plenty of high-quality customers. We supply vehicle chain system products for CZPT vehicle manufacturers such as Honda, Yamaha, Suzuki, DaHangZhouang, CF MOTOR, HangZhou Motorcycles, Knorr-Bremse etc.; Supply agricultural chain system products for CZPT agricultural machinery manufacturers at home and abroad, such as German CLASS and LOVOL; Supply industrial equipment chain system products for CZPT enterprises such as ZheJiang HangZhouan, HangZhou Logistics, HangZhou Kejie and Sinsong Robotics. The trademark has been registered in many countries, and the products are exported to a great number of countries and regions in Europe, America, Southeast Asia, South America, Africa etc., serving more than 3,000 after-sales customers.

Production Capacity Equipment

-By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.

Our Advantages

1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.

Product Advantages

HangZhou CHOHO possesses advanced manufacture equipments such as high precision machining center, hold-in program control broacher, Japan CNC lathe, South Korea CNC lathe, ZheJiang CNC hobbing machine, ZheJiang CNC gear shaping machine, unique spray cooling technology double station high frequency quenching furnace,honing machine tool, laser marking machine to develop large scale, high quality , professional and stable process. inspection instruments such as metallographic test machine, chemical analysis machine, fatigue test machine, projection and wearing test machine to make sure each sprocket we sold have reliable quality.
 

Certifications

-CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.

Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!

Broad Customer Channels  Market Continues to Develop!

International Exhibition

CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!

 

Packaging & Shipping

Packaging Details: Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization

 

We are very close to the port of HangZhou, which saves a lot of logistics costs and transportation time!
 

We have our own logistics company and transportation department. If you need me to deliver goods to your warehouse or other ports in China, such as ZheJiang Port and ZheJiang Port, we can also do it!

Related Products:

 

FAQ:
1. Are you a Manufacturer or Trade Company?
    -We are a factory focused on producing and exporting Chains for over 36 years and have a professional international trade team.
2. What terms of payment do you usually use?
    -T/T term 30% in advance,70% balance before shipment. Show your products and packaging before shipping.
3. What is your lead time for your goods?
    -Normally 1~45 days depending on order quantity & Spec, Stock can be shipped immediately.
4. Do you attend any Shows?
    -We attend the Hannover Messe, Bologna Fair, Canton Fair, AMTS, VIV ASIA, CIAME, Motor China, PTC Asia, Frankfurt Auto Parts, and other world-famous exhibitions!
5. Do you offer free samples?
   -Yes, we can. or you just bear the shipping cost.
6. Is OEM available?
   -Yes, OEM is available. 
7. What are your major products?
   -Our main products are all kinds of Automobile Chain Systems, Motorcycle Chain Systems, Industrial Chain Systems, Agricultural Chain Systems, Bicycle chain Systems, Saw Chains, and Vessel Chain.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CCC, ISO9001, CE, E-Mark, RoHS, TS16949, TUV/SGS/BV/CE
Standard Component: Non-Standard Component
Technics: Nc Maching
Samples:
US$ 4.99/Piece
1 Piece(Min.Order)

|

Order Sample

Sprocket Samples
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Safety Precautions for Working with wheel sprocket Systems

Working with wheel sprocket systems involves potential hazards, and it’s essential to follow safety precautions to prevent accidents and injuries. Here are some safety measures to consider:

  • Proper Training: Ensure that anyone working with the wheel sprocket systems is adequately trained in their operation, maintenance, and safety procedures.
  • Use Personal Protective Equipment (PPE): Always wear appropriate PPE, such as safety glasses, gloves, and protective clothing, to protect against potential hazards.
  • Lockout/Tagout: Before performing any maintenance or repair work on the system, follow lockout/tagout procedures to prevent accidental startup or energization.
  • Keep Work Area Clean: Maintain a clean work area and remove any debris or obstacles that could interfere with the operation of the system.
  • Inspect Regularly: Regularly inspect the wheels, sprockets, and chains for signs of wear, damage, or misalignment. Address any issues promptly.
  • Ensure Proper Lubrication: Adequate lubrication of the sprockets and chains is crucial for smooth operation and to reduce friction and wear.
  • Check Tension: Verify that the chain tension is within the recommended range. Too loose or too tight tension can lead to operational problems.
  • Avoid Loose Clothing: Keep long hair, loose clothing, and jewelry away from moving parts to avoid entanglement.
  • Follow Manufacturer’s Guidelines: Adhere to the manufacturer’s guidelines and recommendations for installation, operation, and maintenance of the wheel sprocket system.
  • Use Guards and Enclosures: Install appropriate guards and enclosures to protect against contact with moving parts.
  • Safe Handling: When transporting or handling heavy wheels or sprockets, use proper lifting techniques and equipment.

Prioritizing safety when working with wheel sprocket systems is essential to prevent accidents and maintain a safe working environment. Always be vigilant, follow safety protocols, and address any concerns promptly to ensure the well-being of everyone involved.

wheel sprocket

Noise and Vibration in wheel sprocket Configurations

In a wheel sprocket configuration, noise and vibration levels can vary depending on several factors:

  1. Quality of Components: The quality of the wheel sprocket components can significantly impact noise and vibration. Well-manufactured and precisely engineered components tend to produce less noise and vibration.
  2. Lubrication: Proper lubrication of the sprocket teeth and chain or belt can reduce friction, which in turn helps minimize noise and vibration.
  3. Alignment: Correct alignment between the wheel sprocket is crucial. Misalignment can lead to increased noise and vibration as the components may not mesh smoothly.
  4. Tension: Maintaining the appropriate tension in the chain or belt is essential. Insufficient tension can cause the chain to slap against the sprocket teeth, resulting in noise and vibration.
  5. Speed and Load: Higher speeds and heavier loads can lead to increased noise and vibration levels in the system.
  6. Wear and Damage: Worn-out or damaged components can create irregularities in motion, leading to increased noise and vibration.

To reduce noise and vibration in a wheel sprocket setup:

  • Use high-quality components from reputable suppliers.
  • Ensure proper lubrication with appropriate lubricants.
  • Regularly inspect and maintain the system to detect any misalignment, wear, or damage.
  • Follow manufacturer guidelines for chain or belt tensioning.
  • Consider using vibration-damping materials or mounting methods if necessary.

Minimizing noise and vibration not only improves the comfort and safety of the machinery but also extends the life of the components by reducing wear and fatigue.

wheel sprocket

Role of a wheel sprocket in a Mechanical System

In a mechanical system, a wheel sprocket play a crucial role in transferring motion and power from one component to another. They are essential elements of various machines and mechanisms, such as bicycles, conveyor systems, automobiles, and industrial machinery. Let’s explore their functions in more detail:

1. Wheel:

The wheel is a circular component with a central shaft (axle) that allows it to rotate freely around the axle’s axis. Its primary functions include:

  • Motion Transmission: When a force is applied to the wheel’s outer edge, it rotates around the axle, enabling the transfer of linear motion into rotational motion.
  • Load Bearing: The wheel’s structure and material are designed to support and distribute the load placed on it, allowing smooth movement over various surfaces.
  • Reduction of Friction: By using wheels, the friction between the moving object and the ground is significantly reduced, making it easier to move heavy loads with less effort.
  • Directional Control: Wheels can be attached to steering mechanisms to control the direction of movement in vehicles and other equipment.

2. Sprocket:

A sprocket is a toothed wheel designed to mesh with a chain or a belt, facilitating motion transfer between the sprocket and the chain/belt. Its key functions include:

  • Power Transmission: When rotational force (torque) is applied to the sprocket, the teeth engage with the links of the chain or belt, transferring motion and power from one sprocket to another.
  • Speed and Torque Conversion: Different-sized sprockets can be used to adjust the speed and torque of the driven component in a mechanical system.
  • Positive Drive: The teeth on the sprocket and the links on the chain/belt create a positive drive system, reducing the likelihood of slippage or loss of power during operation.
  • Chain/Belt Tensioning: Sprockets help maintain proper tension in the chain or belt, ensuring optimal performance and longevity of the power transmission system.

Together, wheels and sprockets form a vital part of mechanical systems, enabling efficient motion transmission, power transfer, and control in a wide range of applications across various industries.

China Best Sales Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket  China Best Sales Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket
editor by CX 2024-04-15

China OEM Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket

Product Description

Product Parameters

Company Profile

-HangZhou Choho Industrial Co., Ltd. is a leading company in the domestic chain transmission industry. the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise, and the first A-share listed company in China’s chain drive industry. The stock code is 003033.
-Relying on industry-leading R&D technology, product quality and service, CHOHO has achieved plenty of high-quality customers. We supply vehicle chain system products for CZPT vehicle manufacturers such as Honda, Yamaha, Suzuki, DaHangZhouang, CF MOTOR, HangZhou Motorcycles, Knorr-Bremse etc.; Supply agricultural chain system products for CZPT agricultural machinery manufacturers at home and abroad, such as German CLASS and LOVOL; Supply industrial equipment chain system products for CZPT enterprises such as ZheJiang HangZhouan, HangZhou Logistics, HangZhou Kejie and Sinsong Robotics. The trademark has been registered in many countries, and the products are exported to a great number of countries and regions in Europe, America, Southeast Asia, South America, Africa etc., serving more than 3,000 after-sales customers.

Production Capacity Equipment

-By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.

Our Advantages

1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.

Product Advantages

HangZhou CHOHO possesses advanced manufacture equipments such as high precision machining center, hold-in program control broacher, Japan CNC lathe, South Korea CNC lathe, ZheJiang CNC hobbing machine, ZheJiang CNC gear shaping machine, unique spray cooling technology double station high frequency quenching furnace,honing machine tool, laser marking machine to develop large scale, high quality , professional and stable process. inspection instruments such as metallographic test machine, chemical analysis machine, fatigue test machine, projection and wearing test machine to make sure each sprocket we sold have reliable quality.
 

Certifications

-CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.

Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!

Broad Customer Channels  Market Continues to Develop!

International Exhibition

CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!

 

Packaging & Shipping

Packaging Details: Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization

 

We are very close to the port of HangZhou, which saves a lot of logistics costs and transportation time!
 

We have our own logistics company and transportation department. If you need me to deliver goods to your warehouse or other ports in China, such as ZheJiang Port and ZheJiang Port, we can also do it!

Related Products:

 

FAQ:
1. Are you a Manufacturer or Trade Company?
    -We are a factory focused on producing and exporting Chains for over 36 years and have a professional international trade team.
2. What terms of payment do you usually use?
    -T/T term 30% in advance,70% balance before shipment. Show your products and packaging before shipping.
3. What is your lead time for your goods?
    -Normally 1~45 days depending on order quantity & Spec, Stock can be shipped immediately.
4. Do you attend any Shows?
    -We attend the Hannover Messe, Bologna Fair, Canton Fair, AMTS, VIV ASIA, CIAME, Motor China, PTC Asia, Frankfurt Auto Parts, and other world-famous exhibitions!
5. Do you offer free samples?
   -Yes, we can. or you just bear the shipping cost.
6. Is OEM available?
   -Yes, OEM is available. 
7. What are your major products?
   -Our main products are all kinds of Automobile Chain Systems, Motorcycle Chain Systems, Industrial Chain Systems, Agricultural Chain Systems, Bicycle chain Systems, Saw Chains, and Vessel Chain.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CCC, ISO9001, CE, E-Mark, RoHS, TS16949, TUV/SGS/BV/CE
Standard Component: Non-Standard Component
Technics: Nc Maching
Samples:
US$ 4.99/Piece
1 Piece(Min.Order)

|

Order Sample

Sprocket Samples
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Ensuring Proper Alignment between a Wheel and its Corresponding Sprocket

Proper alignment between a wheel and its corresponding sprocket is crucial for the smooth and efficient operation of the wheel sprocket system. Misalignment can lead to increased wear, noise, and reduced performance. Here are some steps to ensure proper alignment:

  • Use Precision Components: Ensure that both the wheel sprocket are high-quality, precision-manufactured components that meet the required specifications. Using well-machined components will aid in achieving better alignment.
  • Check Axle Alignment: Make sure the axle or shaft on which the wheel sprocket are mounted is straight and properly aligned. Any misalignment in the axle can lead to misalignment of the wheel sprocket.
  • Proper Mounting: Ensure that the wheel sprocket are securely and correctly mounted on the axle or shaft. Use appropriate fasteners and tightening techniques to prevent any movement or shifting during operation.
  • Check for Parallelism: The axes of the wheel sprocket should be parallel to each other. Measure the distance between the axes at multiple points to verify parallel alignment.
  • Use Alignment Tools: Alignment tools, such as laser alignment systems, can be employed to accurately align the wheel sprocket. These tools can help identify and correct misalignments effectively.
  • Check Tension and Tensioner Alignment: If a tensioner is used in the system, ensure that it is properly aligned and applying the right tension to the chain or belt. Incorrect tension can cause misalignment.
  • Regular Maintenance: Implement a regular maintenance schedule to check and adjust alignment as needed. Regular inspections can help identify and address alignment issues before they cause significant problems.
  • Monitor Performance: Keep an eye on the performance of the wheel sprocket system. Unusual noises, vibrations, or signs of wear can indicate misalignment and should be investigated promptly.

Proper alignment is essential for the long-term performance and reliability of the wheel sprocket system. By following these steps and conducting regular maintenance, you can ensure that the wheel sprocket work together harmoniously, providing efficient power transmission and minimizing wear and tear.

wheel sprocket

Extending the Lifespan of a wheel sprocket Assembly

To ensure a long lifespan for your wheel sprocket assembly, consider the following maintenance and operational practices:

  • Regular Lubrication: Apply the appropriate lubricant to the sprocket teeth and chain or belt regularly. Lubrication reduces friction, wear, and the likelihood of premature failure.
  • Proper Tension: Maintain the correct tension in the chain or belt to prevent excessive stress and wear. Follow the manufacturer’s guidelines for tensioning.
  • Alignment: Ensure precise alignment between the wheel sprocket. Misalignment can cause accelerated wear and increase the risk of failure.
  • Inspections: Regularly inspect the wheel, sprocket, chain, or belt for signs of wear, damage, or fatigue. Replace any worn-out or damaged components promptly.
  • Cleanliness: Keep the wheel sprocket assembly clean from dirt, debris, and contaminants that can contribute to wear and corrosion.
  • Correct Usage: Operate the machinery within the recommended speed, load, and temperature limits specified by the manufacturer.
  • Training and Operator Awareness: Ensure that equipment operators are properly trained to use the machinery correctly and are aware of maintenance procedures.
  • Use Quality Components: Invest in high-quality wheels, sprockets, chains, or belts from reputable suppliers to improve durability and reliability.
  • Replace Components in Sets: When replacing parts, consider replacing the entire set (e.g., chain and sprockets) to maintain uniform wear and performance.
  • Address Vibration Issues: Excessive vibration can accelerate wear. Investigate and address any vibration problems promptly.

By following these practices, you can significantly extend the lifespan of your wheel sprocket assembly, reduce downtime, and enhance the overall efficiency and safety of your machinery.

wheel sprocket

Choosing the Right Size of Sprocket to Match a Wheel

Choosing the correct size of sprocket to match a wheel is essential for ensuring efficient power transmission and proper functionality of a mechanical system. Here are the steps to help you choose the right size of sprocket:

1. Determine the Pitch Diameter of the Wheel:

Measure the diameter of the wheel from the center to the point where the teeth of the sprocket will engage with the wheel. This measurement is known as the pitch diameter of the wheel.

2. Identify the Desired Gear Ratio:

Determine the gear ratio you want to achieve for your application. The gear ratio is the ratio of the number of teeth on the sprocket to the number of teeth on the wheel and determines the speed and torque output.

3. Calculate the Number of Teeth on the Sprocket:

Once you have the pitch diameter of the wheel and the desired gear ratio, you can calculate the number of teeth on the sprocket using the formula:

Number of Teeth on Sprocket = (Desired Gear Ratio) * (Number of Teeth on Wheel)

4. Select a Standard Sprocket Size:

Based on the calculated number of teeth on the sprocket, choose a standard sprocket size that comes closest to the calculated value. Sprockets are available in various tooth counts, and you may need to choose the nearest size available.

5. Consider Chain Compatibility:

If you are using a chain drive system, ensure that the selected sprocket is compatible with the chain you plan to use. The chain pitch (distance between the centers of adjacent roller pins) should match the pitch of the sprocket.

6. Verify Center Distance:

Check that the center distance between the wheel and the sprocket is appropriate for your application. The center distance is the distance between the centers of the wheel and the sprocket and should be set to achieve the desired tension and alignment of the chain or belt.

7. Consider the Material and Tooth Profile:

Select a sprocket material suitable for your application, such as steel, stainless steel, or plastic, based on factors like load, environment, and operating conditions. Additionally, consider the tooth profile (standard or custom) to ensure smooth engagement with the chain or belt.

By following these steps and considering the specific requirements of your machinery and mechanical system, you can choose the right size of sprocket to match your wheel and achieve optimal performance and longevity of the system.

China OEM Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket  China OEM Precision Stainless Steel Industrial Casting Agricultural Roller Chain Custom Conveyor Drive Sprocket
editor by CX 2024-04-15

China Custom Chain and Sprockets Cycle Sprocket for Conveyor Systems Agricultural Machinery and Industrial Equipment

Product Description

 

Product Description

A taper bushing sprocket is a common sprocket that differs from a normal sprocket in its nested tapered bushing for easy installation and removal. It adopts a tapered bushing to keep the chain in a stable position, thereby improving the transmission efficiency and wear resistance of the sprocket.

Product Parameters

 

product high precision Taper Bushing Sprocket
bore pilot bore ,taper bore , finished bore and special bore 
material stainless steal / steel / iron / brass / bronze / aluminum /as requirement
surface treatment Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on
heat treatment High frequency quenching and so on
processing CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
certificate  ISO 9001 ,  SGS
products available gear , sprocket , timing pulley , v-belt pulley , coupling , shaft , expansion sleeve ,taper bushing
package  brown paper ,oiled paper , carton box ,wooden box ,as requirement
advantage Quality first Service superior , Advanced equipment,Experienced workers,Perfect testing equipment
lead time within 15 days samples. 30-45days offcial order 

 

workshop & equipment

 

Application Field

 

Our Advantages

 

1  . Prioritized Quality          
2  .Integrity-based Management
3  .Service Orientation
4  .150+  advanced equipment
5  .10000+  square meter  factory area
6  .200+ outstanding employees  
7  .90% employees have more than 10 year- working   experience in our factory
8  .36 technical staff
9  .certificate  ISO 9001 , SGS

10  . Customization support

11   .After-sales support

 

Production process

 

 

shipping

 

sample orders delivery time:
10-15 working days  as usual
15-20 working days  in busy season

large order leading time :
30-40 working days as usual
 

 

FAQ

1. why should you buy products from us not from other suppliers?
We are a decade year-experience manufacturer on making the gear, specializing in manufacturing varieties of gears, such as helical gear ,bevel gear ,spur gear and grinding gear, gear shaft, timing pulley, rack, , timing pulley and other transmission parts .

2. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese

3. how can we guarantee quality?
1 .Always a pre-production sample before mass production;
2 .Always final Inspection before shipment;   
3 .We have high-precision CNC gear grinding machine, high-speed CNC gear hobbing machine, CNC gear shaping machine, CNC lathe, CNC machining center, various grinding machines, universal gear measuring instrument, heat treatment and other advanced processing equipment. 
4 . We have a group of experienced technical workers, more than 90% of the workers have more than 10 years of work experience in this factory, can accurately control the manufacturing of products and customer needs. We regularly train our employees to ensure that we can produce high-precision and high-quality products that are more in line with our customers’ needs.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

wheel sprocket

Factors Affecting the Efficiency of a wheel sprocket Setup

Several factors can influence the efficiency of a wheel sprocket system in power transmission and motion control applications. These factors should be carefully considered and optimized to ensure the system’s overall effectiveness and performance:

  • 1. Friction: Friction between the wheel, sprocket, and the chain or belt can lead to energy losses. Using high-quality materials and lubrication can help reduce friction and improve efficiency.
  • 2. Alignment: Proper alignment between the wheel and the sprocket is critical. Misalignment can cause increased wear, noise, and reduced efficiency. Regular maintenance and alignment checks are essential.
  • 3. Tension: The correct tension in the chain or belt is crucial for efficient power transmission. Too loose or too tight tension can lead to performance issues and premature wear.
  • 4. Material and Design: The choice of materials for the wheel sprocket, as well as their design, can impact efficiency. High-quality materials and well-engineered components reduce wear and improve overall system performance.
  • 5. Load Distribution: Uneven load distribution across the wheel sprocket can lead to localized wear and decreased efficiency. Ensuring proper load distribution helps maintain uniform wear and power transmission.
  • 6. Environmental Factors: Harsh environmental conditions, such as dust, moisture, and extreme temperatures, can affect the efficiency of the system. Choosing suitable materials and implementing protective measures can mitigate these effects.
  • 7. Maintenance: Regular maintenance, including lubrication, inspection, and timely replacement of worn components, is vital for the long-term efficiency of the system.
  • 8. Speed and Torque: The operating speed and torque requirements of the application should be considered when selecting the appropriate wheel sprocket size and specifications.
  • 9. Chain or Belt Type: Different types of chains or belts, such as roller chains, silent chains, or toothed belts, have varying efficiencies. Choosing the right type for the specific application is crucial.
  • 10. System Integration: The wheel sprocket system should be integrated correctly with other components in the machinery to ensure smooth operation and minimal energy losses.

By carefully considering and optimizing these factors, it is possible to improve the efficiency of the wheel sprocket system, leading to reduced energy consumption, less wear and tear, and overall better performance.

wheel sprocket

Vertical Power Transmission with wheel sprocket System

Yes, a wheel sprocket system can be used for vertical power transmission. In such cases, the system is designed to transmit power and motion between vertically aligned shafts. Vertical power transmission using a wheel sprocket assembly follows similar principles to horizontal transmission, but there are some factors to consider:

  1. Load and Torque: When transmitting power vertically, the weight of the load can significantly impact the torque requirements. The torque must be sufficient to lift the load against gravity while accounting for friction and other resistive forces.
  2. Sprocket Selection: Choosing the right sprocket is critical for vertical transmission. The sprocket teeth must be designed to engage the chain or belt effectively and prevent slipping, especially when lifting heavy loads.
  3. Lubrication: Proper lubrication is essential to reduce friction and wear in the system. Vertical applications may require specific lubricants to ensure smooth operation and prevent premature failure.
  4. Tensioning: Maintaining the correct tension in the chain or belt is crucial for vertical power transmission. Proper tension helps prevent sagging and ensures proper engagement between the wheel sprocket.
  5. Overhung Load: In vertical setups, the weight of the sprocket and shaft assembly can impose an overhung load on the bearings. Adequate support and bearing selection are necessary to handle this load.

Vertical power transmission with a wheel sprocket system is commonly used in various applications, including conveyor systems, elevators, and some industrial machinery. Proper design, installation, and maintenance are essential to ensure safe and efficient operation in vertical configurations.

wheel sprocket

Choosing the Right Size of Sprocket to Match a Wheel

Choosing the correct size of sprocket to match a wheel is essential for ensuring efficient power transmission and proper functionality of a mechanical system. Here are the steps to help you choose the right size of sprocket:

1. Determine the Pitch Diameter of the Wheel:

Measure the diameter of the wheel from the center to the point where the teeth of the sprocket will engage with the wheel. This measurement is known as the pitch diameter of the wheel.

2. Identify the Desired Gear Ratio:

Determine the gear ratio you want to achieve for your application. The gear ratio is the ratio of the number of teeth on the sprocket to the number of teeth on the wheel and determines the speed and torque output.

3. Calculate the Number of Teeth on the Sprocket:

Once you have the pitch diameter of the wheel and the desired gear ratio, you can calculate the number of teeth on the sprocket using the formula:

Number of Teeth on Sprocket = (Desired Gear Ratio) * (Number of Teeth on Wheel)

4. Select a Standard Sprocket Size:

Based on the calculated number of teeth on the sprocket, choose a standard sprocket size that comes closest to the calculated value. Sprockets are available in various tooth counts, and you may need to choose the nearest size available.

5. Consider Chain Compatibility:

If you are using a chain drive system, ensure that the selected sprocket is compatible with the chain you plan to use. The chain pitch (distance between the centers of adjacent roller pins) should match the pitch of the sprocket.

6. Verify Center Distance:

Check that the center distance between the wheel and the sprocket is appropriate for your application. The center distance is the distance between the centers of the wheel and the sprocket and should be set to achieve the desired tension and alignment of the chain or belt.

7. Consider the Material and Tooth Profile:

Select a sprocket material suitable for your application, such as steel, stainless steel, or plastic, based on factors like load, environment, and operating conditions. Additionally, consider the tooth profile (standard or custom) to ensure smooth engagement with the chain or belt.

By following these steps and considering the specific requirements of your machinery and mechanical system, you can choose the right size of sprocket to match your wheel and achieve optimal performance and longevity of the system.

China Custom Chain and Sprockets Cycle Sprocket for Conveyor Systems Agricultural Machinery and Industrial Equipment  China Custom Chain and Sprockets Cycle Sprocket for Conveyor Systems Agricultural Machinery and Industrial Equipment
editor by CX 2024-03-26